Installing the Device Driver–Windows 98SE
Only
Note: Windows XP/2000/Me and Macintosh users
—No driver
installation is required. Your Adaptec ACS-300 enclosure works with
the drivers built into your operating system.
This section describes how to install the USB 2.0 driver. The SATA interface will
use the build-in mass storage driver from the system.
Before you begin, ensure you have the most recent driver updates installed on your
computer. Refer to the Microsoft Web site at www.microsoft.com to download
updates.
You may need your Windows 98SE CD during this installation.
To install the device drivers:
1. Power on your computer, if you have not already done so.
2. Insert the Adaptec ACS-300 CD into your CD drive.
3. From
the
Windows
Start
menu, click
Run
, and then click
Browse
.
4. Browse to the CD drive, then double-click
Setup.exe
to begin the driver
installation.
5. Follow the on-screen instructions to install the USB 2.0 driver.
5
