Field Service Documentation
3
Copyright © 2009, Overland Storage, Inc. All rights reserved. Information in this document is subject to change without notice and does
not represent a commitment on the part of Overland Storage or any of its subsidiaries.
Snap Server 4400
Snap Server® 4400 SCSI Card
2
Using your thumb, slide the metal protective plate off as shown in the
illustration.
Put the protective plate in a safe place so you can use it to cover the hole if you
ever permanently remove the SCSI card.
3
Install the SCSI card.
Press firmly to until the card snaps into place, indicating that it is seated
properly in its slot. Avoid contact with metal surfaces on the card. Grasp or
press the edges only.
4
Pull the release lever back into place to secure the card.
Back of
server
