manualshive.com logo in svg

Adaptec 29320LPE - SCSI Card Storage Controller U320 320 MBps, Инструкция по установке и эксплуатации

Поделиться
Скачать
Adaptec 29320LPE - SCSI Card Storage Controller U320 320 MBps Скачать руководство пользователя страница 56

Chapter D: Troubleshooting

●

56

[xxxxx0ab] Driver already loaded for this SCSI card

The driver is already loaded for this SCSI card. Verify that the correct SCSI card is specified in 
your command line or startup file.

[xxxxx0ac] Driver already loaded for all SCSI cards

The driver is already loaded for all the supported adapters in this system.

[xxxxx0a4] SCSI bus reset by third-party hardware

Hardware such as an array enclosure may have reset the SCSI bus. This is a normal condition 
unless you receive additional errors.

[xxxxx0a7] Unable to allocate memory
[xxxxx0a8] Unable to allocate memory

This indicates that there may be a problem with the amount of memory installed in your 
system. Verify that your system has at least the minimum amount of memory required by your 
operating system.

[xxxxx0a9] Possible interrupt conflict

This indicates that the SCSI card IRQ conflicts with the IRQ of another board installed in your 
system. Check your hardware documentation for instructions on setting and changing IRQs.

[xxxxx0c9] Invalid command line parameter 

A command line option for the driver is invalid. See your operating system manual for valid 
command line options.

[xxxxx0ca] Invalid command line syntax
[xxxxx0cb] Invalid command line syntax
[xxxxx0cc] Invalid command line syntax

The command line syntax for the driver is incorrect. See your operating system manual for 
entering the correct syntax.

[xxxxx07c] Unable to allocate memory
[xxxxx07d] Unable to allocate memory
[xxxxx07e] Unable to allocate memory
[xxxxx07f] Unable to allocate memory

This indicates that there may be a problem with the amount of memory installed in your 
system. Verify that your system has at least the minimum amount of memory required by your 
operating system.

Error Messages

Error messages generated by the Windows drivers can be viewed by opening the Windows 
Event Viewer error logs.

To view events generated by the driver:

1

Double-click the 

Event Viewer

 icon in the Administrative Tools program group. 

Error messages generated by the driver show up as Event ID 11. Error messages generated 
by the SCSI port show up as Event ID 9.

Содержание 29320LPE - SCSI Card Storage Controller U320 320 MBps



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды