10
Australia and New Zealand
•
Visit our Web site at http://www.adaptec.com.au.
•
To speak with a Technical Support Specialist, call +612 9416 0698,
Monday–Friday, 10:00
A
.
M
. to 4:30
P
.
M
., Eastern Australia Time. To expedite your ser-
vice, have your computer and TSID in front of you.
Hong Kong and China
•
Visit our Web site at
http://www.adaptec.com
.
•
To speak with a Technical Support Specialist, call +852 2869 7200,
Monday–Friday, 10:00 to 17:00.
•
Fax Technical Support at +852 2869 7100.
Singapore
•
Visit our Web site at
http://www.adaptec.com
.
•
To speak with a Technical Support Specialist, call +65 245 7470,
Monday–Friday, 10:00 to 17:00.
Regulatory Compliance Statements
Federal Communications Commission Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. However, if this equipment does cause
interference to radio or television equipment reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
• Use a shielded and properly grounded I/O cable and power cable to ensure compliance of this unit to the spec-
ified limits of the rules.
1394IG.fm Page 10 Thursday, November 9, 2000 8:55 AM
