C-3
Using Advanced Configurable Parameters in Windows NT 4.0
5
From the Edit menu, select
Add Key
.
6
In the Key Name edit box, type
Parameters
. Leave the Class
edit box blank.
7
Click
Parameters
.
8
From the Edit menu, select
Add Key
.
9
In the Key Name edit box, type
Device
. To specify a SCSI card,
type the number of the SCSI card after
Device
.
For example, type
Device0
for the first SCSI card, type
Device1
for the second, and so on. If you omit the SCSI card
number, the configuration information may be applied to other
SCSI cards installed in your computer.
Leave the Class edit box blank.
10
Click
Device
.
11
From the Edit menu, select
Add Value
.
12
In the Value Name edit box, enter one of the valid parameter
values. Make sure to enter the appropriate data type for the
value. To enter additional values, repeat Steps 10–12.
Note:
Changes made with the Registry Editor do not take
effect until you shut down and then restart your computer.
