Adaptec 1420SA - Serial ATA II RAID Controller, Быстрое руководство по установке, Страница: 11 / 19

9
Creating the Driver Disk
9 Select between the different creation methods for RAID 0 or
RAID 1. (For more details about the creation methods, see the
Adaptec Serial ATA RAID 1420SA Installation and User’s Guide .)
RAID 0 — Select No Init ( default ), or Migrate
RAID 1 — Select Build ( default ), Clear , or Quick Init
Caution: Do not interrupt the creation of a RAID 0 using the
Migrate option. If you do, there is no way to restart, and
no way to recover the data that was on the source drive.
10 When the array is finished building, continue the driver
installation for your operating system:
– Windows
—
Step 4 on page -10
– Red Hat Linux — Step 4 on page -11
– SuSE Linux — Step 4 on page -12 .
Creating the Driver Disk
Before you install your driver, you will need to create a driver disk.
To create the driver disk:
1 Set your system BIOS so that your computer boots from the CD drive.
2 Insert the Adaptec CD and turn on the computer.
3 Follow instructions and respond to prompts as necessary to get
to the Adaptec Start Menu.
4 Click Create Driver Disk , then select the appropriate operating
system.
5 If you selected Linux , you need to also select the architecture, one
of the following:
– i586 —For Pentium I or II computers
– i686 —For Pentium III, IV, or AMD K-6 computers
– Athlon —AMD Athlon computers
– Athlon & Intel_x86_64 —AMD Opteron or AMD64 and Intel
EM64T computers
!
AAR-1420SA QIG.book Page 9 Monday, March 7, 2005 1:30 PM