ADAPT SOLUTIONS ASENTO EV-COLC15R, Руководство по установке

Страница: 13 / 22

10. Install the provided pointed allen screw into the threaded hole on the b-pillar adapter. Take the b-
pillar trim, install it onto the b-pillar and tap it onto the pointed allen screw to mark the point that the
b-pillar will have to be drilled and then remove the allen screw. A 3/4 hole will have to be drilled to
allow the b pillar adapter to pass through the plastic.
11. The plastic clip on the upper b pillar trim which is in line with the drilled hole will have to be removed.
12. Run the power and ground cable for the
ASENTO
. Follow the instructions as detailed in the
attached document:
ELECTRICAL INSTALLATION
(Found at the end of this manual.)