For detailed instructions on how to use the software please visit
docs.adaptloggers.com/protonml00.
PROTON
MlOO
Operational Instructions
1.
Click the button and check
the LCD Screen. If you see
"REC" or "END" on the
screen, the device is used.
4.
"REC" stops blinking and
becomes solid after the
pre-cooling period. Solid
REC icon indicates that
the device is recording the
tern peratu re.
Action Required
Start recording
Stop recording
Download report
Status Request
)
2.
Press the button for 3 secs to start the
trip. A blinking "REC" on LCD screen
indicates the start of the trip. Place the
device in the package.
s.
Press the button for 3 secs
to stop the trip. The LCD
screen shows "END" to
indicate that the trip has
been ended.
3.
The trip recording starts
only after 30 mins from the
start of the trip. This is the
default preset pre-cooling
period. The trip cannot be
stopped during this
pre-cooling period
6.
Connect the USB of the
data logger to a PC to
access the PDF and CSV
reports.
Instruction
)
Confirmation Indication
Press 3 secs
Press 3 secs
Scan QR/Connect
device through USB
"REC" icon on LCD
"END" icon on LCD
status request by single click of the button will have the following possibilities;
LCD display indication observed
Only temperature shown.
No REC or END on LCD
REC blinking
--)•
static REC with bell icon
Static REC without bell icon
END blinking with bell con
END blinking without bell icon
+91-8639739890
--)•
Status indicated
pre-rec mode
REC-delay mode
Recording mode
and atleast one
Recording ended and no
violation has been recorded
Recording ended and at least
one violation has recorded
Recording ended and no
violation in trip
www.adaptloggers.com
