background image

For detailed instructions on how to use the software, please visit

01

KELVIN S100

Status Request

Operational Instructions

docs.adaptloggers.com/kelvins100

Use the LCD display or scan 

the QR on the device to 

check the status of the 

device. Make sure that the 

device is not used.

04

Action to be

performed

Start recording

Stop recording

Download Report

Status request by single click of the button will have the following possibilities:

Only temperature. 

No REC or END

Press 3 secs

Press 3 secs

Scan QR/Connect device

“REC” icon on LCD

“END” icon on LCD

Instruction

LCD display indication observed

Status indicated

Confirmation Indication

05

Recording starts after precool-

ing delay period after starting 

the trip. To check the status of 

the device or alarms during 

the trip, scan the QR or check 

the display of the device.

02

03

Switch on the trip by 

pressing the button for 3 

secs. You should see “REC” 

icon on the LCD display. 

Place the device inside the 

package

After the trip is started, there is a 

preset precooling delay set for the 

device. Temperature records during 

this period are not included in the 

trip report.

Press the button for 3 secs to 

stop the trip. Scan the QR to 

access the trip report.  

REC blinking and delay interval shown

Static REC with bell icon

Static REC without bell

END blinking with bell

END blinking without bell

pre-rec mode

rec-delay mode
Recording mode and at least 

one violation has been recorded
Recording mode and no

violation has been recorded

Recording ended and at least 

one violation has been recorded.

Recording ended and no

violation has been recorded

www.adaptloggers.com

+91-8639739890

[email protected]

single

click of

button

Отзывы: