Page 4
Adamson Systems Engineering |
S10n
S10n User Manual
• The S10n is a sub-compact, 2-way, full range line array enclosure designed for extended throw capabilities. It
contains two symmetrically arrayed 10” transducers and a 4” compression driver mounted on an Adamson
waveguide.
• Up to 20 S10n can be flown in the same array when using the S10 & S119 Support Frame (930-0020).
• Due to the use of Controlled Summation Technology, the S10n maintains a consistent nominal horizontal
dispersion pattern of 80°.
• The high frequency waveguide is designed to couple multiple cabinets across the entire intended frequency band
without loss of coherence.
• There are 9 rigging positions available, spanning 0° to 10°. Always consult Blueprint AV™ and the S-Series Rigging
Manual for correct rigging positions and rigging instructions.
• Adamson’s use of proprietary techologies such as Controlled Summation Technology and Advanced Cone
Architecture give the S10n an extremely high maximum SPL level of 141.3 dB.
•
The nominal impedance of the S10n is 8 Ω per band.
• The operational frequency range of the S10n is 60Hz to 18kHz, +/- 3 dB.
• The S10n is intended to be used as a standalone system or with other S-Series products. The S10n is designed to
pair easily and coherently with all Adamson subwoofers.
• The wooden enclosure is made of marine grade birch plywood, and has an aluminum and steel rigging system
mounted on each corner. Without sacrificing low resonance to composite material, the S10n is able to maintain a
low weight of 27 kg / 60 lbs.
•
The S10n is designed for use with Lab.gruppen’s PLM+ Series amplifiers.
S10n Sub Compact Line Array
