
Adamson Systems Engineering |
Page 4
IS7p User Manual
IS7p
• The IS7p is an ultra-compact point source enclosure. It contains two symmetrically arrayed 7” LF transducers
and a 3” HF compression driver mounted on an Adamson waveguide, available in two configurations; with
dispersion patterns of either 70° x 40° (HxV) or 100° x 50° (HxV) each rotatable in increments of 90°.
• The operational frequency range of the IS7p is 80Hz to 18kHz. The use of proprietary techologies such as
Advanced Cone Architecture allows high maximum SPL of 136.5 dB.
• The enclosure has an unobtrusive visual design which blends seamlessly into the surrounding space, is made of
marine grade birch plywood, and has steel rigging discs on the top, bottom, and on each side, to be used with a
wide variety of rigging accessories. Without sacrificing low resonance to composite material, the IS7p weighs only
15 kg / 33.1 lbs.
•
The IS7p is intended to be used as either a standalone system, or a fill enclosure in tandem with other IS-Series
products. The IS7p is designed to pair easily and coherently with all IS-Series subwoofers.
•
The IS7p is designed for use with Lab.gruppen’s D-Series line of installation amplifiers. The nominal impedance of
the IS7p is 8 Ω per band, maximizing amplifier efficiency.
IS7p Ultra Compact Point Source