ZUBRI HEATER
Simultaneously pass a lighter through the square box on the side of the burner and ignite. Continue to hold
knob down while lighting, and for 30 seconds after heat is lit. This allows the propane to flow through the
hose and to the burner.
If the flame stays lit, proceed to the next step. If not, repeat the lighting procedure. If unit does not light
after three attempts, return the control knob to the off position and wait five minutes for the propane to
clear before attempting to re-light.
Once the heater has run in the ignite position, turn the knob
counter-clockwise to the HIGH heat position and release the
knob.
7.
8.
