Adam S6A Mk2 Скачать руководство пользователя страница 4

4

1.

 

Quick Start

Important information for set up

Acclimation

: After having unpacked your loudspeaker, please allow the sys-

tem to acclimate to the temperature of the room. Please do not connect the 
speaker for approximately an hour.

HQ Cabling

: We recommend using high quality cables to guarantee optimal 

performance. 

Solid stand

: It is important to ensure the speakers stand firmly on a solid 

ground (if they are not wall-mounted)!

Package

: We recommend not to damage the package and to retain it. The 

original packaging is the best guarantee for safe transportation (see 7.).

Break-in  time

:  Please  note  that  the  loudspeakers  will  need  a  few  days  to 

achieve optimum sonic performance. 

Quick start S6A Mk2

Before connecting the loudspeakers to your audio components and the 
power source make sure that both the loudspeakers and your audio system 
is switched off!

Set all level controls fully counterclockwise.

Connect the loudspeakers with your audio units: Use a XLR cable. The male 
plug goes into the loudspeaker, the female plug into your audio component.

Check if the specified voltage matches the voltage of the power supply 
you use. If this is not the case do not connect the loudspeakers to a power 
source! Please contact your local dealer or national distributor.
If the voltages match, connect the loudspeaker via the included power 
cables to two AC sockets.

Switch on your audio system. Switch on the main on/off switches on the 
front panel of the loudspeakers.

Turn on your source of music and adjust the volume carefully.

1.2

1.1

d)

a)

b)

c)

e)

Содержание S6A Mk2















Отзывы: