Adam S5A Mk2, Руководство по эксплуатации, Страница: 4 / 24

4
Quick Start
• After having unpacked your monitor, please allow the system to acclimate to the
temperature of the room. Please do not connect the speaker for approximately an
hour.
• Now, check the voltage setting (2). It has to conform with the voltage standard of the
country you stay in. If it does not, contact your distributer or ADAM Audio, please.
• Make sure the power switch at the back of the unit is turned off as well as the switch
on the front of the monitor.
• Connect the provided power cord to the speaker.
• Decrease the volume of your audio system to protect your speaker and ears from
damage when switching the system on.
• Connect the XLR-Input (1) of the speaker to the output of your audio system.
• Switch on the rear power switch first, then the front switch. By increasing the volume
of your audio system, you should now hear sound.
• To achieve the best possible sound reproduction, please see the following consider-
ations for speaker placement.
(1) (2)