Customer telephone helpline: 08448 809301
Helpline email address: [email protected]
CO9071 V2_020611
- 4 -
Note:
When the heater is turned on for the first time, it may release a slight, harmless odour. This
odour is a normal occurrence caused by the initial heating of the internal heating elements.
If the heater is not used frequently, then this may reoccur, however this is normal for this
style of heater.
CAUTIONS
Do’s
Always install the heater in accordance with this guide. If in doubt obtain expert
advice.
Always make sure the electrical socket is accessible and located adjacent to, but
not above the heater.
Always disconnect the heater from the electrical supply before carrying out any
cleaning or maintenance.
Always make sure the heater is firmly secured if wall mounting.
Always make sure the heater is stable when using feet.
Don’ts
Never leave children unsupervised in a room where the heater is ON and
unguarded.
Never obstruct or cover the outlets or force items into its openings.
Never install or use the heater anywhere where water is in use, i.e. Bathrooms,
Shower Rooms, and Swimming Pool etc.
Never use aerosols or steam cleaners on or around the heater.
Never route the mains supply cord under carpet etc.
Never install or use the heater close to curtains or combustible materials.
Never use the heater to dry clothes etc.
Never sit or stand on the heater.
Never use the heater outdoors.
Never cut off the plug and hard wire into a fixed fuse spur.
SAFETY CUT-OUT SYSTEM
DO NOT OBSTRUCT THE AIR VENTS OF THE ELECTRIC HEATER
.
This appliance has a ‘self resetting’ safety cut out system that will activate if the air inlets or outlets
are obstructed. If the electric heater is obstructed, it will overheat. When the temperature exceeds
85 degrees C, the heater element will cut out, until a safe temperature is regained.
CLEANING
Please allow the unit to cool down completely before cleaning.
For general cleaning use a soft clean duster
– DO NOT use abrasive cleaners. The glass
fascia should be cleaned carefully with a soft cloth.
The area around the heater should be kept free from animal hair, lint and other extraneous
material that may be drawn into the appliance which could affect its performance.
