Customer telephone helpline: 08448 809301
Helpline email address: [email protected]
CO9071 V2_020611
- 1 -
These instructions are for your safety. Please read through them thoroughly before use
and retain for future reference. Failure to follow them could cause injury and/or property
damage.
CONTENTS
Introduction
1
Unpacking
1
Handling
1
Parts Supplied
2
Tools Required
2
Electrical Specification
3
Cautions
4
Safety Cut-Out System
4
Cleaning
4
Wall Mounting
5
Free Standing With Feet
6
Operating
6
Plug Replacement
7
Appliance Data
7
Certification
7
INTRODUCTION
Thank you for choosing this product. This product is designed to meet the most stringent quality,
performance, and safety requirements. This guide aims to improve your understanding and
appreciation of your new product by providing simple and informative assembly and operational
instructions
.
UNPACKING THE PRODUCT
Carefully unpack the product using the following procedure:
Carefully lift the pieces/product out of the box.
Carefully remove the protective wrapping from the pieces.
Locate the fixing pack and put aside.
Ensure the supply requirements indicated on the Rating Label fixed to the rear of the product
is compatible with the supply voltage available.
HANDLING
Before continuing any further with the installation of this product please read the following:
When lifting always keep your back straight. Bend your legs and not your back.
Avoid twisting at the waist. It is better to reposition your feet.
Avoid upper body / top heavy bending. Always bend from the knees rather than the waist. Do
not lean forward or sideways whilst handling the product.
Always grip with the palm of the hand. Do not use the tips of fingers for support.
Always keep the product as close to the body as possible. This will prevent unnecessary and
undue strain on the body.
Use gloves to provide additional grip.
Always use assistance if required.
Use & Care Manual
Glass Panel Electric Convector Heater
