- 8 -
Customer telephone helpline: 08448 809301
Helpline email address: [email protected]
CO9073 V3_210711
Use and Care Manual
Eclipse Electric Fire
OPERATING THE ELECTRIC FIRE
The appliance is controlled using 4 switches, located
under the hood of the fire
.
A switch is in the ON position when the side with the markings on (i.e. I, or II)
is ‘pressed in’
Use the following sequence to operate. The
grey
represents a ‘pressed switch.’
MAINTENANCE
Please allow the unit to cool down completely before cleaning.
There are no specific requirements for the care of this unit, other than general
cleaning.
Metallic (silver/chromed effect) fires can be cleaned using a cloth and propriety
cleaner. Other features (non-metallic) can be cleaned using a clean moistened
cloth and finally wiped with a dry cloth.
If the supply cord is damaged it must be replaced by a suitably qualified person.
The area around the fire should be kept free from animal hair, lint and other
extraneous material that may be drawn into workings of the appliance and could
affect its performance.
Controls located under the hood
On/Off
with Effect
only
Cool Air Blow &
Effect
1kW Heat setting
2kW Heat Setting
