Adam AE-202, Руководство пользователя

Страница: 18 / 28

©Adam Equipment Company 2008
16
8.1 FILTER
•
The value as set by the factory will be displayed (for ex. “
F L t 0
”).
•
Press the [x10 /Inc] key to scroll through the other options (
0
to
9
see Note below).
•
Select the desired setting by pressing [Kg/lb /Set] and move to the
next parameter for setting the communication parameters.
Note:
FLt 0
= Standard filter.
1
= Increased filter.
2 to 9
= High filter with hold for animal weighing.
Select the desired settings by pressing [Kg/lb /Set] and move to the next
parameter.
8.2 COMMUNICATION PARAMETERS
These set of parameters allow you to set the values for functions that
control communicating with a PC or a printer via the RS-232 interface.
8.2.1 COMMUNICATION ADDRESS
•
The value as set previously will be displayed (for ex. “
A d S 00
”).
•
If you wish to change it, press [Acc / ]. The first digit will start
flashing.
•
Use the [Acc / ] key to advance to the next digit and the [x10 /Inc]
key to increment the value of the digit.
Note: AdS 00 = Continuous output mode.
01-98 = External command mode from PC
99 = Manual print mode with [Acc / ]
Once the value is entered, press
[Kg/lb /Set] to move to the next
parameter for setting the baud rate.
Store the desired settings by pressing
[Kg/lb /Set] and move to the next
parameter