Adam ADAM-3600-C2G, Руководство пользователя

Страница: 44 / 60

ADAM-3600 Series User Manual 36
Duration (s) : communication time; it should be shorter than Periods. the default value (0)
means there is no interruption during communication with WebAccess.
Figure 4.23 WebAccess whereIAM
4.2.5 Connectivity Configuration
The ADAM-3600-C2G is an Intelligent Remote Terminal Unit and acts as an intelligent net-
work node in IoT. It can control the downstream field devices to complete delivery tasks and
transfer data to upstream devices wired or wirelessly. As a key device, the connecting func-
tion of ADAM-3600-C2G is very important. Therefore, iRTU Studio provided users connectiv-
ity configuration function to select connection way and connection protocols.
4.2.5.1 Active Connection
In order to break the closed nature of internal network and make connection with the main
station timely, ADAM-3600-C2G provides active connection function and users can configure
the parameters in iRTU Studio. The specific configured parameters include:
 Protocol : There are two optional protocols: DTU-Four Faith PROT and Webac-
cess WhereIAm (in the case of the upper station is Webaccess). The specific
operation will be different under different protocols, which will be described
below.
 Local Service : Modbus RTU and Modbus TCP.
 Binding Interface : None, LAN1, LAN2, WLAN and Cellular. None represents
that system auto routing network port.
 Period(s) : The connecting interval that ADAM-3600-C2G provides active con-
nection. Users can select the connection period according to the requirements.
 Duration(s) : The time of each connection lasts. Users can also select the con-
nection duration according to the requirements.
 Idle time : The time interval when there is no message being sent. The connec-
tion will automatically disconnect. When the idle time is set as 0, it indicates that
the idle time is infinite.
 Center lists : Users can edit master station information including master station
IP and station port.