Adam Equipment CQT1751GR, Руководство пользователя

Страница: 14 / 24

©Adam Equipment Company 2009
14
5.0 PARAMETERS
The scale has 2 parameters that can be set by the user.
FUNCTION SECTION DESCRIPTION
Auto Off See section 5.2 Sets the auto power off function
Backlight See section 5.3 Sets the backlight
OFF BL backlight is off
1 BL backlight is automatic
2 BL backlight is always on
5.1 PARAMETER SETTING
•
Press [On/Off] to turn the balance off.
•
Press and Hold the [Recall/Tare] key and press the [On/Off ] key to switch
the scale on, the scale will show “grn-1.0 GRN” and then enter the
parameter setting. The display will show "OFF PWR".
5.2 AUTO POWER OFF
The auto power off function helps conserve power, when using the batteries or AC
adapter. The Auto switch-off time may be set up by the user and is the time after a period
of inactivity i.e. no weight movement or key presses.
1) To set this parameter turn the power off press and hold the [Recall/Tare] key then
press the [on/off] key once, then release the [Recall/Tare] key.
2) After a few seconds, the display will show the first function PWR
3) Press the [S/P/CE] key until you the display shows you XX PWR where XX is last
setting
4) Press [Recall/Tare] to select the settings as follows:
Off PWR Auto power off
10 PWR 10 seconds before the power will switch off
20 PWR 20 seconds before the power will switch off
30 PWR 30 seconds before the power will switch off
40 PWR 40 seconds before the power will switch off
50 PWR 50 seconds before the power will switch off
60 PWR 60 seconds before the power will switch off
70 PWR 70 seconds before the power will switch off
80 PWR 80 seconds before the power will switch off
90 PWR 90 seconds before the power will switch off
5) Press the [S/P/CE] key to confirm the setting
6) To exit turn the scale off and back on again