Ada ZVE 350 SD, Руководство по эксплуатации

Страница: 17 / 50

ZVE 350 SD
1
Cautions
● Don’t drop the product or use by force.
● Don’t disassemble the product to avoid failure.
● Don’t place the product with corrosive gas or objects.
● Don’t expose the product in vibrative, high or low temperature.
● Store the product in a safe area.
● Don’t immerse the product into water, which will result in damage to product.
● Check the battery periodically.
●Remove the batteries if not for use for a long time.
TROUBLE SHOOTING
Problem Possible cause Solution
LCD is on but with no image or display
the message “No Signal”
1.The probe connector is loose Check the probe connector, clean and reconnect
2.Foreign body on the lens Check the lens for foreign body
When LED brightness is at the top, and
the light is still dim, screen is alternat-
ing between black and white, flashing,
or powered off itself
Battery low Please change the battery
Inspection cannot be powered on
Battery low Please change the battery
Batteries are not properly placed Check and replace the battery
www.geooptic.ru