Ada Microcab II, Руководство пользователя

Страница: 3 / 10

INTRODUCTION
Thank you for purchasing the ADA MlCROCAB II Miked Guitar Cabinet Emulator. The
MlCROCAB II is designed to deliver the distinct warmth and presence of a "close-miked"
guitar speaker cabinet to a mixing console for direct recording or for sound reinforcement.
The
MlCROCAB II takes the signal from the output of a guitar preamp or poweramp. Your
new MlCROCAB II will preserve all the tone and fidelity from your guitar, preamp, and effects
units, while delivering the frequency response of various speaker cabinets, simulating difficult
and time-consuming miking techniques used in recording studios.
Please take a few moments to read this manual and familiarize yourself with your new
MlCROCAB II.
IMPORTANT:
At this time, please complete and return the enclosed warranty card.
FEATURES
Emulates any type or size of guitar cabinet.
Stereo inputs and outputs.
Stereo pass thru to poweramp or speaker load box.
Variable THUMP control allows tuning the cabinet's low resonance.
HI BALANCE control emulates mic placement and cabinet brightness.
Lightweight design, in one rack space.
One year parts and labor warranty
PRECAUTIONS
WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or
moisture.
CAUTION: To prevent electric shock, do not remove cover. No user serviceable
parts inside. Refer servicing to qualified service personnel.
SET UP WARNING: WHEN CONNECTING THE MICROCAB TO THE OUTPUT OF A TUBE
POWER AMP OR AN ALL-TUBE HEAD, ALWAYS KEEP A LOAD CONNECTED TO THE
OUTPUT OF THE AMP. THE LOAD CAN BE EITHER A "LOAD BOX" OR THE SPEAKER
CABINET NORMALLY USED WITH THE AMP. USE THE EXTENSION JACK AT THE
SPEAKER CABINET TO CONNECT THE MICROCAB OR USE THE PASS THRU
CONNECTORS ON THE MICROCAB TO RECONNECT THE LOAD TO THE POWER AMP.
Page: 3