Ada GENESIS SYSTEM Скачать руководство пользователя страница 3

- 2 -

SAFETY INSTRUCTIONS

READ  INSTRUCTIONS - All the safety and operating  instructions should be

read before the appliances are operated.

RETAIN INSTRUCTIONS - The operating instructions should be retained for

future reference.

HEED WARNING - All warnings on the appliances and in the operating

instructions should be adhered to.

.
FOLLOW INSTRUCTIONS - All operating and use instructions should be

followed.

WATER AND MOISTURE - The appliances should not be used near water - for

example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.

LOCATION - The appliances should be installed  in a stable location.

WALL OR CEILING MOUNT - The appliances should not be mounted to a wall

or ceiling.

VENTILATION - The appliances should be situated so that their location or

position does not interfere with their proper ventilation.  For example, the
appliances should not be situated on a bed, sofa, rug  or similar surface
that may block  the ventilation openings.

HEAT - The appliances should be situated away from heat sources such as

radiators, heat  registers, stoves, or other appliances that produce heat.

POWER SOURCES - The appliances should be connected to a power supply

only of the type described in the operating instructions or as marked on the
appliances.

GROUNDING - Make sure that the units in the system are always connected

to a standard three-prong grounded outlet (the circular pin is ground).
When operating this unit at a higher voltage with a different power cord
configuration, consult your dealer for the proper power cord/outlet com-
bination to use before operating this unit.

POWER CORD PROTECTION - Power supply cords should be routed so that

they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the points where they exit from the appliances.

CLEANING - The appliances should be cleaned only with a polishing cloth or

a soft dry cloth.  Never clean with furniture wax, benzine, insecticides or
other volatile liquids since they may corrode the face plates.

POWER LINES - An outdoor antenna should be located away from power lines.

PERIODS OF DISUSE - The power cord of the appliances should be unplugged

from the outlet when the units are not in use  for a long period of time.

OBJECT AND LIQUID ENTRY - Care should be taken so that objects do not

fall and liquids are not spilled into the enclosures through openings.

DAMAGE REQUIRING SERVICE - The appliances should be serviced by an

authorized service center or qualified service personnel when:

• The power supply cords or plugs have been damaged; or
• Objects have fallen, or liquid has been spilled into the

appliances; or

• The appliances have been exposed to rain; or
• The appliances do not appear to operate normally or

exhibit a marked change in performance; or

• The appliances have been dropped; or the enclosures have

been damaged.

SERVICING - The user should not attempt to service the appliances beyond that

described in the operating instructions.  For all other servicing, contact the
factory.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRI-
CAL SHOCK, DO NOT EXPOSE THE APPLI-
ANCES IN THIS SYSTEM TO RAIN OR MOIS-
TURE.  REPLACE FUSE ONLY AS MARKED.

CAUTION:

TO PREVENT ELECTRIC SHOCK, DO NOT
PLUG THE UNITS IN THIS SYSTEM INTO ANY
OUTLET OR EXTENSION CORD WITHOUT THE
STANDARD THREE-PRONG CONFIGURA-
TION, WHERE THE CIRCULAR HOLE IS USED
FOR THE GROUND PLUG.

IMPORTANT:

The exclamation point within the equi-
lateral triangle is intended to alert the
user of the presence of important op-
erating and maintenance (servicing)
instructions in the literature accompa-
nying the appliances.

CAUTION:

TO PREVENT RISK OF ELECTRICAL SHOCK, DO NOT
REMOVE COVER (OR BACK).  NO USER-SERVICEABLE
PARTS ARE INSIDE ANY OF THE UNITS IN THIS SYSTEM.
REFER SERVICING TO QUALIFIED SERVICE PERSON-
NEL.

The lightning flash with the arrowhead,
within an equilateral triangle, is in-
tended to alert the user of the pres-
ence of un-insulated "dangerous volt-
age" within the products' enclosures
that may be of sufficient magnitude to
constitute a risk of electrical shock to
persons.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Содержание GENESIS SYSTEM




































Отзывы: