Ada AngleMeter 45, Руководство по эксплуатации

Страница: 6 / 28

Angle Meter 45
PB
Supplemental angle
Press the HOLD/SUP button (11) for ~2 seс to change the display to the
supplemental angle.The supplemental angle is 180° minus the current angle
between the arms (13 and 16). The SUP indicator (2) will appear and flash
on the display. Press (11) again for ~2 sec to return to normal angle.
Easy Mitre Angle
With the arms (13 and 16) set to the desired angle, press the MITRE button
(15) for ~1 sec. The mitre angle (90° - ½X) will be shown. The display will
be locked on that angle and the MITRE indicator (5) will appear and flash
on the display. To set the mitre saw, see pic.3, setting M.
Compound Angle Mode
For compound angles such as cuts for crown molding, you will need to enter
compound mitre mode and store two angles into memory; the Spring (SPR)
and Corner (CNR) angles (see pic. 4 and 5). The unit will then calculate the
Mitre and Bevel angles needed to set a compound mitre saw. See pic. 3, set-
tings M (mitre) and B (bevel).
Note: If you do not know the spring angle of the item you are working with,
it is easier to get that angle before starting. The spring (SPR) angle is usually
38° or 45° for crown molding. See pic. 4.
pic.