ADA INSTRUMENTS Wall Scanner 120 Prof, Руководство по эксплуатации

Страница: 8 / 26

8
English
tion. In live wires mode, the device determines the maximum depth of the
live wires. The illuminated indicator above the button indicates selected
detection mode.
MULTIFUNCTION SEARCH MODE
(FOR WOODEN BEAMS)
In this mode, the detector can signal the detection in a wall except wooden
beams:
magnetic metal objects
non-magnetic objects, for example plastic tubes with water.
non-magnetic metal objects, for example copper tubes.
live objects, for example, live wires.
non-magnetic metal objects, for example, copper tubes.
Press button . Illuminated ring (1) and indivcator over the button
light up green. When detecting metal objects, nails, screws, the detector
may detect wooden beam as a metal object by mistake. In this case, place
the detector in another place of the object and start the measurement
again. In rare cases, the detector cannot detect the object because the
sensor zone and the surface of proximity sensor are dirty. In that case,
clean the device with dry cloth and restart the detection.
Some environmental conditions can influence the measurement results.
The following factors can influence the detection accuracy:
Environment: strong magnetic or electromagnetic field, moisture, metal
objects, foil insulation materials or conductive wallpaper or tiles.
•
Material or the size of the object.
• Material or it’s composition.
• Incorrect detection mode.
• Before drilling, sawing, laying in the wall, floor and ceiling, study the
structural plan.
• Small scanning depth of wires that are not under voltage.
• That’s why, before you start drilling, sawing or milling in walls,