ProDigit
30
MEASUREMENT FOUNDATION
ProDigit
30
37
Pitch (Fig.7)
The digital laser level can be used to measure the pitch of a roof. It measures the pitch in inches
of rise per foot of run. Push the conversion button to change angle to pitch. The pitch will be
read as inches per foot in 1/8-in. increments, with a + or a - sign to indicate if the pitch is above
or below the desired measurement.
Angle (Fig.8)
The digital laser level measures any angle in degrees with up to 0.1° accuracy, at level or plumb
position, the accuracy will be up to 0.05°. This can be used to ind the necessary angle for many
surfaces, and when the conversion button is pushed to display angle, will tell you the angle and
which way it is off of true level. If the beeper button is turned on, the level will beep at 0.00°
angle.
Slope (Fig.9)
The digital laser level measures the slope of a surface in percent. This is useful when laying pipe
for proper drainage. When the conversion button is in the slope mode, it will display the surface
being measured in percent, with exact level at 0.00%. If the beeper button is turned on, the level
will beep at 0.00%.
