CUBE MINI
INSTRUMENTS
B, along the vertical laser line on the wall and measure the distance 3m from point B to another point C.
Point C must be on the vertical laser line, it means the height of C point is 3m.
Measure the distance from point A to point C, if the distance is over 2 mm, please, contact with seller to
calibrate the laser.
Care and cleaning
Please handle measuring instrument with care. Clean with soft cloth only after any use. If necessary
damp cloth with some water. If instrument is wet clean and dry it carefully. Pack it up only if it is perfectly
dry. Transport in original container/case only.
Note: During transport On/Off compensator lock (3) must be set to position “OFF”. Disregard may lead to
damage of compensator.
Specific reasons for erroneous measuring results
•
Measurements through glass or plastic windows;
•
Dirty laser emitting window;
w w w . e k t
2
. c o m
Electronics
Katrangi
Trading
