COSMO
70
1
Indirect measurement – determing a distance using 3 measurements
This function is used when it’s necessary to measure diagonals of rectangular areas, and also for calcula-
tion of the length of frameworks, inclined distances and so on.
Press button (2) 4 times. The symbol “triangle” is displayed. The distance to be measured is blinking in
the symbol triangle.
Press button (1) to take distance measuring (side of the triangle) . The result of the function is displayed
in the second line. This measurement can be taken in the mode of continious measurement. Press and hold
button (1) for 2 sec. After second pression of the button (1) maximum value is fixed. The second distance to
be measured is blinking in the symbol triangle. It’s very important to have right angle between laser beam
and the length you need to measure. That’s why you should work in continious mode. Press and hold button
(1) for 2 sec. After second pressure of the button (1) maximum distance is fixed. The result of the function
is displayed in the main display area. Previous measurement is displayed in the first line.
