Sailing Yacht SALONA 37
Sailing Yacht SALONA 37
Sailing Yacht SALONA 37
Sailing Yacht SALONA 37
AD BOATS ltd.
AD BOATS ltd.
AD BOATS ltd.
AD BOATS ltd.
Page of 80
51
NOTICE
MAINTENANCE:
BEFORE WINTER STORAGE:
∼
FREE THE FRESH AND SEA WATER
CIRCUITS OF WATER ACCORDING TO THE
DETAILED INSTRUCTIONS IN THE ENGINE
MAINTENANCE MANUAL AND CARE FOR
THE AIRING OF THE PIPES AND HOSES.
∼
DISMOUNT AND CLEAN THE VACUUM
VALVE TWICE A SEASON ACCORDING TO
THE INSTRUCTIONS OF THE ENGINE
MANUFACTURER.
7.3
Exhaust gas system
The yacht is fitted with a “wet” exhaust system, i.e. cooling sea water is
injected into the exhaust gas elbow causing a cooling of the exhaust gases.
This mixture is led into the silencer/water lock, run through the pipe to the
space between stern cabins, then led upwards at the stern and let to escape to
the side above the waterline.
The exhaust gas hose consists of a synthetic rubber material with an
integrated steel spiral. The hose is heat-resistant (for a time) and should be
checked and replaced when necessary. A constant flow of sea water has to be
guaranteed. The hose is secured at the joints with two clips.
If there is an interruption of sea water flow, the temperature sensor in the
exhaust gas hose will release a visual and acoustic alarm. In this event, you
should stop and switch off the engine immediately until the problem has been
resolved (see the engine manufacturer’s manual).
NOTICE
A REGULAR INSPECTION OF SALTWATER
COMING OUT THE EXHAUST OUTLET IS
HIGHLY ADVISABLE.
