ACV Solo 18, Инструкции по установке, эксплуатации и обслуживанию

Страница: 18 / 48

EN • 18
664Y4200 • F
E
N
FR
R
U
P
L
DE
IT
ES
N
L
C13 C93
C53
C43
C43
B23
B23P C33
InstallatIon
Chimney connection options
C93 : Connection with an individual system of which the exhaust duct for
the combustion products is installed in an exhaust pipe that is part of
the building. The appliance, the exhaust duct and the terminal units
are certified as an inextricable assembly.
C43 : Connection by two ducts to a collective duct system serving more
than one appliance; this system of collective ducts features two
ducts connected to a terminal unit that simultaneously intakes fresh
combustion air and discharges the combustion products outside
through openings that are either concentric or close enough together
to be subjected to similar wind conditions.
C53 : Connection to separate ducts for the supply of combustion air and for
venting the combustion products; these ducts may end in zones with
different pressure levels.
C63 : Type C boiler which is intended for connection to a room sealed flue
system which is approved and sold separately.
(Prohibited in Belgium).
B23 : Connection to an exhaust duct venting the combustion products
outside of the installation area, with the combustion air being drawn
directly from this area.
B23P : Connection to an exhaust system of the combustion products
designed to operate with positive pressure.
C13 : Connection by pipes with horizontal terminals that simultaneously
take in combustion air for the burner and discharge combustion
products outside through openings that are either concentric or close
enough together to be subjected to similar wind conditions.
C33 : Connection by pipes with vertical terminals that simultaneously take
in fresh air for the burner and discharge the combustion products
outside through openings that are either concentric or close enough
together to be subjected to similar wind conditions.