Acuva Eco NX-Silver
O W N E R ’ S P R O D U C T M A N UA L
Advanced UV-LED Water Purification |
acuvatech.com
Page 8
Maintenance
The Acuva UV-LED Water Purification Systems are designed to give years of
trouble-free use. Using state-of-the-art UV-LEDs, there are no mercury bulbs
to replace, however there are some simple tasks that should be performed
to ensure continued trouble-free operation.
1. Check that none of the connectors are leaking annually.
2. Replace the inline 5-micron carbon filter after winterization or as per
instruction on the filter label
3. The small quartz windows inside the Eco unit do not reach high
temperatures to encourage mineral build-up (scaling) as with UV lamp
systems. As a result, no significant scaling or loss of performance due to
scaling over time is expected.
Regular Maintenance
Winterizing
WARNING
Frozen pipes mean cracked pipes. Failure to properly winterize the
Acuva Eco-NX before it is exposed to freezing temperatures can lead
to damage and water leakage.
If installed in a Recreational Vehicle (RV) Ensure that your RV is
winterized as per your owner’s manual.
Trouble Shooting
Indicator LED State
Fault Condition
Comments to User
LED OFF (Faucet Closed)
No Fault
-
LED OFF (Faucet Open)
Unit is not powered
If no Blue light on the Eco-NX,
verify that the unit is connected to
power. If unit is indeed connected
correctly, verify that the power line
is electrified with a voltmeter. If the
voltage is as expected and the Eco-
NX indicator light does not light up,
please contact Acuva for support.
Red ON
LED Power out of range If persists, please contact Acuva for
support.
Yellow Blinking
Low input voltage
Verify that the input voltage is above
11 volts, by using a Voltmeter.
