Acute Communication Services Pvt. Ltd.
IM: <IMEI Number>
P: <Primary Server IP/URL>: <Primary Server Port>
S: <Secondary Server IP/URL>: <Secondary Server Port>
E: <Emergency Server IP/URL>: <Emergency Server Port>
SW: <Software Version>
8) TEST
To get the device runtime information.
Response Format:-
IM: <IMEI Number>
GP: <GPS Status>
MV: <Main Power Status>
BT: <Battery Voltage>
SIG: <Signal Strength>
PW: <Power Status>
BX: <Device Open/ Close>
IGN: <Ignition Status>
IO: <GPI or GPO Value>
AD: <Analog 1 Value>, <Analog 2 Value>
9) NWINFO
To get current Network Status of the Device.
Response Format:-
IM: <IMEI Number>
OP: <Operator Name>
GSM: <Signal Strength>, <CREG>,<CGREG>
APN: <Current APN>
CON: <Primary CON>, <Secondary CON>, <Emergency CON>
CEL: <MCC>, <MMC>, <LAC>, <CELL ID>
10)
GPSINFO
To get current GPS Status of the Device.
Response Format:-
IM: <IMEI Number>
OP: <Operator Name>
GSM: <Signal Strength>, <CREG>,<CGREG>
APN: <Current APN>
CON: <Primary CON>, <Secondary CON>, <Emergency CON>
CEL: <MCC>, <MMC>, <LAC>, <CELL ID>
11) WHERE
To get Current Device Location information.
12) ODM
– Set Odometer
This command is used to reset the Odometer or set Odometer to a value. The value is in
kilometer and can be floating point.
ODM:<value>
e.g.: ODM:123.45
