AcuRite 75077 Скачать руководство пользователя страница 9

9

Using the Weather Forecaster
Learning Mode 

Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over 

a time period (called Learning Mode) to determine your altitude. After 14 days, the 

Learning Mode icon disappears from the display screen. At this point, the self-calibrated 

pressure is tuned in to your location and the unit is ready for superior weather prediction. 

Weather Forecast

AcuRite’s patented Self-Calibrating Forecasting provides your personal forecast of 

weather conditions for the next 12 to 24 hours by collecting data from the sensor in 

your backyard. It generates a forecast with pinpoint accuracy - personalized for your 

exact location.

Troubleshooting

No outdoor sensor

reception

no bars

If the wireless signal indicator shows no bars:
•  Relocate the display unit and/or the outdoor sensor. The 

units must be within 330 ft (100 m) of each other.

•  Make sure both units are placed at least 3 feet (.9 m) 

away from electronics that may interfere with the wireless 

communication (such as TVs, microwaves, computers, etc).  

•  Use standard alkaline batteries (or lithium batteries in sensor 

when temperature is below -4ºF/-20ºC). Do not use heavy 

duty or rechargeable batteries. NOTE: It may take up to 

20 minutes for display unit and sensor to synchronize after 

batteries are replaced. 

OPERATION

RAIN

LIKELY

SNOW

LIKELY

RAIN/SNOW

MIX LIKELY

MOSTLY

CLOUDY

CLOUDY

View the complete list of icons at www.AcuRite.com/acurite-icons

Display screen

not working

•  Check that the batteries are installed correctly. Batteries may 

need to be replaced.

Outdoor 

 temperature

is flashing or   

showing dashes

Flashing of the outdoor temperature is generally an indication 

of wireless interference. 

1.  Bring both the sensor and display unit indoors and remove 

at least one battery from each.

2. Make sure the A-B-C switch on both units match.
3. Reinstall the battery in the outdoor sensor. 
4. Reinstall the battery in the display unit.
5.  Let the units sit within a couple feet of each other for about 

20 minutes to gain a strong connection.

 

Содержание 75077













Отзывы: