8
SETUP
Display Setup
Install Backup
Batteries
3 AAA Batteries
(optional)
Plug in
Power Adapter
A B C
A-B-C Switch
Set to match sensor's
ABC switch
IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage.
Power adapter is required as the primary power source to enjoy the full functionality of this product.
Set the A-B-C Switch
Locate the A-B-C switch inside the
battery compartment. Set the A-B-C
switch to A, B or C. You must select the
same letter choices for both the sensor
and the display in order for the units to
synchronize.
Install or Replace Backup Batteries
(optional)
1. Remove the battery
compartment cover.
2. Insert 3 x AAA batteries into the
battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Plug in Power Adapter
For the best performance, plug in the
power adapter as the main power source
for this product.
2
3
1
Display Setup
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN
ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an
extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only
batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak.
DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circui
the supply terminals.
