SETUP
Install or Replace Batteries
AcuRite recommends high quality alkaline batteries for the best product
performance. Heavy duty or rechargeable batteries are not recommended.
1. Remove the belt clip.
1
Remove Belt Clip
2. Remove the battery cover.
Pull tab UP to
3. Insert 2 x AAA batteries into
unlock belt clip
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery
B
compartment.
Slide belt clip
4. Replace the battery cover.
OFF
5. Replace the belt clip.
Install Batteries
3
2 AAA alkaline
Remove
batteries
2
Battery Cover
c
c
A
miles/km
english/français
Select Miles or Kilometers Distance Units
To select between miles or kilometers distance units, press the "miles/km"
button located inside the battery compartment area.
Select English or French Language
To select between English and French, press the "english/français" button
located inside the battery compartment area.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fre,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
4
