10
11
C u s t o m i z i n g S e t t i n g s
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
10
Some examples on how to program vehicle settings.
1.
Turn
the vehicle on.
2.
Store
your desired stations on
the preset buttons and
adjust
your preferred audio sound
levels (BASS, TREBLE, etc.).
3.
Set
your preferred climate
control settings (fan speed,
temperature, etc.).
4. Once you turn the car off,
your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1.
Turn
the vehicle on.
Shift
into
Park (P)
.
3.
Press and hold
the SET button
until you hear a beep, then
release.
2.
Adjust
your preferred seat,
steering wheel, and outside
mirror settings.
4.
Press and hold
the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
* See “
Customize Settings”
in your owner’s manual for other programmable settings.
Tech model shown
R E A R V I E W C A M E R A
( T e c h m o d e l s )
For added convenience, the area behind your vehicle is displayed to help
you navigate while in Reverse (R).
• When you shift into Reverse, a real-time image
of the area behind your vehicle is shown in the
navigation display, along with helpful parking
guide lines.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of
Reverse.
H o w I t W o r k s
11
Note:
Each group of settings is activated by the corresponding remote
transmitter (1 or 2) when it’s used to unlock the driver’s door. When
activated, each item begins to adjust before you enter the vehicle.
H O M E L I N K ®
Press and hold
the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button,
press and release
the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold
the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press
the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press
the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds,
press and
hold
the programmed HomeLink
button for 2 seconds.
a
Press and hold
the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be
programmed to operate up to three remote-controlled devices around
your home, such as garage doors, lighting, or home security systems.
If you have any problems programming HomeLink, see the owner's manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit
www.homelink.com.
10 TL ATG_wbg:ATG_NEW STYLE 8/5/2009 10:58 AM Page 6
