Page
9
of
13
Under-Hood (Engine Idling)
11.
Do the PCM Idle Learn Procedure
To ensure a steady engine idle, do the PCM idle learn procedure as follows after installing the No. 15 BACKUP RADIO
(10 A) and No. 16 BACKUP (10 A) fuses:
1. Start the engine with the transmission in Park, and make sure all electrical items (A/C, audio-navigation unit,
rear window defogger, lights, etc.) are turned off.
2. Wait for the engine to reach operating temperature (the cooling fans cycle twice).
3. Let the engine idle for
10 minutes
with the throttle fully closed.
The PCM idle learn procedure must also be done after updating or replacing the PCM. It
does not
need to be done
after clearing DTCs.
Vehicle Interior
12.
Install the SBW Shifter Cover
Install the cover onto the SBW shifter by gently pressing it into place.
NOTE: The glove box will not open unless the No. 15 BACKUP RADIO (10 A) and No. 16 BACKUP (10 A) fuses are
installed or it is manually opened.
13.
Check/Refresh the SiriusXM
®
Radio Dealer Demo Service (Except in Alaska and Hawaii)
The audio system comes from the factory activated with the SiriusXM Radio dealer demo service. Once you install the
No. 15 BACKUP RADIO (10 A) and No. 16 BACKUP (10 A) fuses, the system should receive the full range of available
channels. You can see a full list of channels at
siriusxm.com
.
While watching the On Demand Multi-Use Display
™
(ODMD
™
), tune to several channels within the full channel lineup.
If you can tune to all of the channels, the dealer demo service is activated.
