Acura RDX 2019, Руководство пользователя

Страница: 422 / 651

uu When Driving u Shifting
420
Driving
■
Shift Operation
1 Shift Operation
NOTICE
When you change
( D
to
( R
and vice versa, come to
a complete stop and keep the brake pedal depressed.
Operating the shift button before the vehicle has
come to a complete standstill can damage the
transmission.
Use the gear position indicator and the shift button
indicator to check the gear position before selecting
a shift button.
If the indicator of the currently selected gear position,
or all the gear position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer’s red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
transmission is in
( N
,
( P
or
( R
, the fuel supply may
be cut off even without the engine speed entering
the tachometer’s red zone.
The beeper sounds once when you change to
( R
.
Gear Position Indicator
Tachometer’s red zone
Press the ( P button.
Pull back the
( R
button.
Press the ( N button.
Shift Button
Indicator
M (sequential mode)
Indicator
Sequential Mode Gear
Selection Indicator
Press the button.
Each time you press the button,
the mode switches between
Drive and S Position mode.
D/S
19 ACURA RDX-31TJB6000.book 420 ページ ２０１８年４月２６日 木曜日 午後４時５１分