PowerBrick 5.0-i7 Quick Guide
Acura Embedded Systems Inc. Updated in Nov 6/13
3. SYSTEM INSTALLATION
•
Installing Removable Hard Drive
Push the HDD Holder into the socket as shown in the picture.
•
Installing SIM Card
Put your SIM Card into the holder
and
Take the SIM card holder and Insert it
into the socket as shown in the picture.
4. POWER IGNITION CONTROLS
•
Ignition On/Off status detectable by SW
•
If the ignition is off and the system is still on after 5 minutes, PowerBrick5.0-i7
will shut down automatically.
•
If the ignition is turned on again and the power-off delay is in progress,
PowerBrick5.0-i7 will cancel the delay function and will continue to operate
normally.
•
If the ignition is turned on again and the power-off delay ended,
PowerBrick5.0-i7 will shut down completely will power-on again automatically.
5.
POWER INPUT CONNECTOR
•
Power Brick5.0'-i7's Power Wiring Diagram
4
1 GND 2 DC+ iN 3 IGNITION
10A
Computer connecter :
pin1-Negative
pin2-DC+ 9~32V
pin3-Ignition
If you don't use Ignition switch,
Please connect pin2 and pin3 wire together.
5
