Acura NSX 2018, Руководство пользователя

Страница: 97 / 113

186 | | 187
MAINTENANCE MAINTENANCE
TABLE OF
CONTENTS
NAVIGATION
VISUAL INDEX DRIVING
SAFETY
INFORMATION
HANDLING THE
UNEXPECTED
INSTRUMENT
PANEL
MAINTENANCE
VEHICLE
CONTROLS
SPECIFICATIONS
AUDIO AND
CONNECTIVITY
CLIENT
INFORMATION
BLUETOOTH®
HANDSFREELINK®
VOICE
COMMAND
INDEX
ACURALINK® INDEX
Changing Wiper Blades
If the wiper blades leave streaks across the windshield, try cleaning them first with a paper towel
or soft cloth and wiper fluid. If the wiper blade rubber has deteriorated, you should change the
wiper blades.
1. Hold the wiper switch in the MIST position as you change the
power mode to VEHICLE OFF. The wiper arms will move into
the service position.
2. Lift both wiper arms.
3. For each wiper, press and hold the tab, then slide the wiper
blade holder out from the wiper arm.
Tab
4. Pull the end of the wiper blade (in the direction of the arrow
in the image) until it is out of the holder’s end cap.
Wiper
Blade
the bottom
End Cap at
5. Pull the wiper blade in the opposite direction to slide it out of
its holder. Insert the flat side of the new wiper blade onto the
bottom part of the holder. Insert the blade all the way and
install the end cap.
6. Slide the wiper blade onto the wiper arm until it locks and
lower both wiper arms.
7. Set the power mode to ON. Hold the wiper switch in the
MIST position until the wiper arms return to their normal
position.
Holder
Avoid dropping the wiper arm, as it may damage the windshield.
NOTICE