background image

uu

AcuraWatch

TM

u

Adaptive Cruise Control (ACC)

Dr
ivi
ng

Automatic cancellation

The beeper sounds and a message appears on the multi-information display when
ACC is automatically canceled. Any of these conditions may cause the ACC to
automatically cancel:

Bad weather (rain, fog, snow, etc.)

When the radar sensor behind the emblem gets dirty.

The vehicle ahead of you cannot be detected.

An abnormal tire condition is detected, or the tires are skidding.

Driving on a mountainous road, or driving off road for extended periods.

Abrupt steering wheel movement.

When the ABS, VSA

®

 or CMBS

TM

 is activated.

When the 

ABS

 or VSA

®

 system indicator comes on.

When you manually apply the parking brake.

When the detected vehicle within the ACC range is too close to your vehicle.

The camera behind the rearview mirror, or the area around the camera, including 
the windshield, gets dirty.

1

Automatic cancellation

Even though ACC has been automatically canceled, 
you can still resume the prior set speed. Wait until the 
condition that caused ACC to cancel improves, then 
press the 

RES/ACCEL

 button.

Содержание AcuraWatch
















































Отзывы: