2 of 6
BII13063-30 (1909)
© 2019 American Honda Motor Co., Inc. – All Rights Reserved.
INSTALLATION
1.
Disconnect the negative cable from the battery.
2.
Remove the driver’s outer dashboard trim.
3.
Remove the driver’s inner dashboard trim, and
disconnect the ENGINE START/STOP switch
connector.
Client Information: The information in this installation
instruction is intended for use only by skilled
technicians who have the proper tools, equipment, and
training to correctly and safely add equipment to your
vehicle. These procedures should not be attempted by
“do-it-yourselfers.”
CLIPS (2)
DRIVER’S OUTER
DASHBOARD TRIM
CLIPS (4)
ENGINE START/STOP
SWITCH CONNECTOR
DRIVER’S INNER
DASHBOARD TRIM
4.
Open the glove box, and remove the passenger’s
dashboard trim panel.
5.
Remove the driver's dashboard lower cover.
NOTE: To avoid whitening the dashboard cover,
start by gently and evenly pulling out on the lower
edge of the cover to release its lower clips, then work
your way up the cover to release the middle and top
clips.
CLIPS (6)
PASSENGER’S
DASHBOARD TRIM
PANEL
CLIPS (9)
DRIVER’S
DASHBOARD TRIM
PANEL
