10
11
10
R E A R V I E W C A M E R A
For added convenience, the area behind your vehicle is displayed to help you
navigate while in Reverse (R).
• When you shift into Reverse, a real-time image of the area behind your
vehicle is shown in the monitor, along with helpful parking guide lines.
• The display turns off when you shift out of Reverse.
Base models
H o w I t W o r k s
T u r n i n g t h e G u i d e L i n e s O n o r O f f
Models with navigation
Base models
Press and hold
the power button for
3 seconds.
Repeat
to turn back on.
Models with navigation
Press and hold
the CANCEL button for
3 seconds.
Repeat
to turn back on.
11
H O M E L I N K ®
Press and hold
the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button,
press and release
the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
Press and hold
the HomeLink
button again.
Training
complete
YES
NO
HomeLink indicator
flashes for 2 seconds,
then remains on.
HomeLink LED
remains on.
YES
NO
YES
NO
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
1
Press and hold
the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
2
a
The remote has a rolling code.
Press
the “learn” button on the
remote-controlled device (e.g.,
garage door opener).
Press
the programmed HomeLink
button again; the remote-controlled
device should operate.
Within 30 seconds,
press and
hold
the programmed HomeLink
button for 2 seconds.
a
Press and hold
the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
3
b
4
5
T r a i n i n g a B u t t o n
The HomeLink Universal Transceiver built into your vehicle can be programmed to
operate up to three remote-controlled devices around your home, such as garage
doors, lighting, or home security systems.
If you have any problems programming HomeLink, see the owner's manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit
www.homelink.com.
11 RDX ATG:ATG_NEW STYLE
6/9/2010
1:41 PM
Page 7
