Acura 2010 TL, Руководство пользователя

Страница: 488 / 612

This switch is under the driver’s side
vent. To turn the VSA system on and
off, press and hold it until you hear a
beep.
When VSA is off, the VSA off
indicator comes on as a reminder.
Press and hold the switch again. It
turns the system back on.
If the low tire pressure/TPMS
indicator comes on (see page
),
or the multi-information display
shows a ‘‘CHECK TPMS SYSTEM’’
message with the indicator flashing
(see page
), the VSA system
automatically turns on even if the
VSA system is turned off with the
VSA OFF switch. In this case, you
cannot turn the VSA system off by
pressing the VSA OFF switch again.
Without VSA, your vehicle will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.
If there is a problem with the hill
start assist system, the VSA system
indicator comes on and stays on. The
multi-information display shows a
‘‘CHECK HILL START ASSIST
SYSTEM’’ message.
With the VSA system indicator on,
you may not be able to stop the
engine even if you park the vehicle
safely. To stop the engine, see
on page
. 186
487
491
CONTINUED
On models with SH-AWD
On models with keyless access system
VSA OFF Switch
Emergency Engine Stop
Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System
D
riv
ing
485
VSA OFF SWITCH
09/07/29 18:24:36 31TK4610_490
2010 TL