
Navigation System
49
Entering a Destination
NOTE:
When finishing a “Today’s
Destinations” trip, the Today’s
Destination list entries are stored to the
Previous Destination list, beginning
with the date (e.g., item 1 shown
below). This entry contains all the
destinations that were included in the
Today’s Destinations itinerary. This
allows you to re-select the entire
Today’s Destinations content at a later
date.
By Go Home
Selecting
Go Home
from the
Enter
destination by
screen takes you home
or to a frequently used address you have
chosen. The displayed address will
correspond to which Remote Keyless
Entry (Driver 1, Driver 2) is being used.
If a
PIN Number
has been set, the
system prompts you to enter your PIN.
Say or enter your PIN, and say or select
DONE
. The system will then display
the
Calculate route to
screen (see
Driving to Your Destination
on
page
50
).
If a
PIN Number
has not been set, the
system displays the
Calculate route to
screen after you select
Go Home
(see
Driving to Your Destination
on
page
50
).
NOTE:
• To edit Home Address, see
Home
Address
in System Set-up on page
89
.
• Prior to departure, you can set areas
to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area
on page
97
.
• PINs are optional. If you choose to
use a PIN, make sure you remember
it. If you forget your PIN, your dealer
will have to reset it for you.
• If a PIN is desired, enter it using the
Personal preference PIN number
feature in Setup. See page
89
.
2008 RL