20
Navigation System
Getting Started
Map Screen Description
Zoom In/Out
Rotate the
Interface Dial knob
to
change the map scale. Zooming in
increases the detail, while zooming out
gives you a wide area view. After
changing the scale, give the system a
few moments to update the display.
Map Scrolling
To view other map areas, move the
Interface Dial
left, right, up, or down.
The map will shift in that direction. To
return the map to your current location,
press either the
MAP/GUIDE
, the
CANCEL
, or the
NAVI BACK
button.
The display automatically changes to
the map screen when you reach your
destination. Press the
MENU
button to
return to the
Enter destination by
screen.
Displaying Current Location
You can see the current address,
latitude, longitude and elevation at any
time by doing one of the following:
• Use the voice control system and say
“Display current location.”
• Push in on the
Interface Dial
, select
Show Icon on Map
, push in on the
Interface Dial
again, and then move
the
Interface Dial
left to select the
CURRENT LOCATION
.
The
Current location
screen will
appear on the display.
NOTE:
The elevation will not appear when the
system is temporarily lacking proper
GPS information. The system elevation
may not agree with elevations shown on
roadside elevation signs, and may
fluctuate plus or minus 100 feet or more.
You can save the current location in
your Address Book by doing one of the
following:
• Use the voice control system and say
“Save current position.”
• Push in on the
Interface Dial
and
select
Save
, and then push in on the
Interface Dial
again.
Select
Return
to return to the previous
screen.
2008 RDX