Acura 2004 TL, Руководство пользователя

Страница: 99 / 283

Both front seats are equipped with
seat heaters. The ignition switch
must be in the ON (II) position to
use them. Push the HI side of the
switch to rapidly heat up the seat.
After the seat reaches a comfortable
temperature, push the LO side of the
switch. This will keep the seat warm.
The HI or LO indicator stays on until
you turn it off by pushing the
opposite side of the switch lightly.
In HI, the heater turns off when the
seat gets warm, and turns back on
after the seat’s temperature drops. It
continues to cycle as long as you
leave it set on HI. The HI indicator
stays on as a reminder that you have
the heater on.
In LO, the heater runs continuously.
It does not cycle with temperature
changes.
Follow these precautions whenever
you use the seat heaters:
Use the HI setting only to heat the
seats quickly. Select the LO
setting when the seats feel warm.
The HI setting draws large
amounts of current from the
battery.
Do not use the seat heaters, even
on the LO setting, if the engine is
left idling for an extended period.
This can weaken the battery,
causing hard starting.
Because of the sensors for the side
airbag system, there is no heater in
the passenger’s seat-back.
Seat Heaters
Instruments and Controls
96
SEAT HEATERS