© 2012 American Honda Motor Co., Inc. - All Rights Reserved.
BII 47360 (1209)
3 of 6
7.
Install an end cap on the bicycle attachment
channel by aligning the lock tab on the end cap
with the hole in the channel. Push down on the
end cap until the lock tab clicks into place.
Repeat on the other end.
3001050K
BICYCLE
ATTACHMENT
END
CAP
END
CAP
LOCK TAB
HOLE
CHANNEL
Installing the Bicycle Attachment on the
Roof Rack
8.
Remove the three mounting levers and T-bolts
from the bicycle attachment, and set them
aside to be installed later.
9.
Pull open the end caps on the carrier bars.
10. Remove the rubber moldings from the T-tracks of
the front and rear carrier bars. Retain the rubber
moldings to be installed later.
3001080K
3
MOUNTING
LEVERS
Reuse.
3 T-BOLTS
Reuse.
BICYCLE
ATTACHMENT
11. Slide two T-bolts into the front cross bar, and slide
one T-bolt into the rear cross bar. Close the end
caps.
FRONT
CROSS BAR
REAR
CROSS BAR
RUBBER
MOLDING
FRONT
CAP
Open.
RUBBER MOLDING
Slide.
FRONT
CROSS BAR
BOLT
FRONT