AcuTouch™
Manual
User’s Manual
Installation
1. Turn power off for both Computer and Display before
making any connection.
2. Connect the power cable (12v AC/DC adapter or 8v –
30v DC).
3. The LCD monitor comes with a 15-pin video cable; you
may use this cable for both IBM PC’s & compatibles and
Macintosh.
4. Tighten the screws of the Display cable until the
connectors are fastened securely.
5. Switch on power to the monitor, then to the computer
system. Red LED should be on when only the monitor is
powered on and green LED should be on when both
monitor and computer are powered on.
The following picture provides the connection outline
Page 3
The Display Timing
Mode
Resolution
VGA
640x480 @60Hz
SVGA
800x600 @56Hz
800x600 @60Hz
XGA
1024x768 @60Hz
Page 4
The Display Outline Dimensions
12V DC input
VGA
USB or Serial
Touch
8-30V
DC
input
USB
