Acumen AirForce Series, Инструкция по эксплуатации

Страница: 8 / 33

8
Chapter 2 Before accessing AiP cameras
Before accessing the AiP camera, make sure that the camera’s RJ-45 network,
audio, and power cables are properly connected. To set the IP address, consult
your network administrator. The default IP address for each AiP camera is
192.168.0.200. Users can use the default IP address to verify the camera’s
network connection.
Chapter 2-1 Configuring IP addresses using IP scan utility
To configure an IP address using the IP scan utility, copy the IP scan application
from the installation CD to your local PC. Alternatively, you can execute the IP
scan software from the installation CD directly. The IP scan utility can also be
downloaded from our company website. To change an IP address, subnet mask,
gateway, or HTTP port, follow the steps below:

Run the IP scan utility

Click “Refresh”. All available devices will be listed in the device list

Select the device item from the device list

To edit or modify addresses, subnet mask, gateway, or HTTP port, use the box

Click “Apply” to configure the settings

Click “Refresh” to verify the settings